When the power outage is lifted or the network is restored, most cameras have the function of automatically reconnecting to the network. Once the network is restored, the camera will try to reconnect to your Wi-Fi network. This is usually an automatic process, and you do not need to manually intervene. If your camera does not automatically repair, you can try the following troubleshooting steps:
Power: Make sure the camera is properly connected to the power and the power supply is normal.
Network: Check that the home WiFi network is working properly. You can restart the router or try to connect other devices to verify that the pair is normal.
Restart the camera: Try to disconnect the camera from the power and reconnect it to the power, let it restart. Wait for a while, the camera should try to repair.
Manually configure the pair: Find the camera in the original home and unbind it from the App, re-connect the network and add the camera, and check the latest firmware.
If you have tried the above steps but the problem still exists, it is recommended to refer to the user manual or contact the manufacturer for further troubleshooting.
